How to Take a Sample to Send to a Lab

• Wet down the material with a light water mist before taking the sample. This reduces the potential release of asbestos fibers.
• Do not disturb the material any more than is necessary to take a small sample.
• Place the sample in a clean, “air-tight” container such as a zip-lock bag or small glass jar.
• Seal the container tightly.
• Use a damp paper towel to clean up any material on the outside of the container or that might have spilled onto the floor.
• Clearly label the container, stating where and when the sample was taken.
• Send the sample to a laboratory for analyses. Make sure to take one sample for each different type of suspect material.

 

[print version]